Dishwasher repair
Standing water, cloudy glasses, or a slow drip under the cabinet. We find what's actually wrong and get your dishwasher cleaning properly again.
What we service
Open every day
7:00 AM – 11:00 PM
95% one-trip fixes
Common parts on board
90-day warranty
Parts and labor covered
Price before work
Approved by you first
Symptoms we see
Dishwashers fail quietly. By the time you notice, the cause has usually been building for weeks.
A clogged filter, a blocked drain hose, or a drain pump that's given up. Food debris and a slow air gap are the usual culprits behind all three.
Spray arms blocked by debris, low water pressure entering the unit, or a wash motor that no longer builds enough force to reach the top rack.
The door gasket hardens and cracks with age. Less often it's the door latch pulling unevenly or a hairline crack in the tub itself.
A failed water inlet valve, a float switch stuck in the up position, or a door latch the control board doesn't register as closed.
Hard water buildup in the heating element and spray arms, sometimes combined with a detergent dispenser that isn't opening at the right time.
Heating element failures and thermistor faults cut cycles short. The display may show nothing at all, which makes proper testing essential.
How we work
We pull the unit out carefully, check the filter and drain path, then run a short cycle with the panel off so we can watch each stage do its job. Most faults reveal themselves in the first two minutes.
We protect your cabinets and flooring before anything moves, and we check the water supply and drain connections while the unit is out. Small leaks behind a dishwasher cause more damage than the fault we came for.

Error codes
Dishwasher codes are usually about water getting in, getting hot, or getting out. These are the ones we decode most often on Fort Worth calls.
| Code | Brand | What it usually points to |
|---|---|---|
| E15 / E24 | Bosch | Water in the base pan or a drain restriction. The float has tripped the anti-flood protection. |
| E09 / E22 | Bosch | Heating element or filter blockage. Dishes stay cold and wet at the end of the cycle. |
| 4C / 4E | Samsung | Water supply fault. Inlet valve, closed tap, or a clogged inlet filter screen. |
| 5C / 5E / OE | Samsung / LG | Drain error. Pump blocked, hose kinked, or the air gap at the sink is clogged. |
| LE / IE | LG | Motor or inlet fault. Either the wash motor is drawing wrong, or water isn't arriving. |
| F8 E4 / F9 E1 | Whirlpool / KitchenAid | Drain recirculation or long-drain fault, often caused by a pump obstruction. |
| HE / F7 E1 | Whirlpool / Maytag | Heating circuit failure, which also means the dry cycle stops working properly. |
| i30 / i20 | Frigidaire | Leak detected in the base or a blocked drain path. |
Water in the base pan or a drain restriction. The float has tripped the anti-flood protection.
Heating element or filter blockage. Dishes stay cold and wet at the end of the cycle.
Water supply fault. Inlet valve, closed tap, or a clogged inlet filter screen.
Drain error. Pump blocked, hose kinked, or the air gap at the sink is clogged.
Motor or inlet fault. Either the wash motor is drawing wrong, or water isn't arriving.
Drain recirculation or long-drain fault, often caused by a pump obstruction.
Heating circuit failure, which also means the dry cycle stops working properly.
Leak detected in the base or a blocked drain path.
Anti-flood codes like E15 mean water has reached the base pan. Turn the supply off at the tap and don't keep running cycles, because the pump keeps pushing water while the leak continues.
Brands
Quiet Bosch integrated units to everyday Whirlpools. We keep pumps, seals, and spray arms for the dishwashers most common in local kitchens.
Service area
We take dishwasher calls throughout Fort Worth, including newer builds up north and the older homes closer to downtown.
We're based here
2515 NE 36th St #18, Fort Worth, TX 76111, USA
Open every day, 7:00 AM – 11:00 PM.
ZIP codes we cover
Reviews
Every cycle left water standing in the bottom. He cleared the drain line, replaced the pump, and ran two cycles to be sure. No mess left behind.
Glasses kept coming out with a white film. He found the spray arm holes clogged and the heating element scaled up. Cleaned and replaced what needed it.
Slow leak was warping the cabinet before I caught it. He replaced the door gasket and checked the supply line too. Careful work.
Book a repair
Send your details and we'll ring you back to set a same-day or next-morning slot. In a hurry? Just call.
How it works
Working hours
Every day: 7:00 AM – 11:00 PM
Call us directly
(817) 330-5698Share a few details and we'll follow up shortly.
Thank You!
Your message has been sent successfully. We'll get back to you shortly.
Your request has been sent. We'll call you back shortly to confirm your visit.